Ocean Star Technologies Private Limited

Endurance: =500,000 times of wire and Plastic Body Electrical

Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC and Weight: 660 g

Cable: 3 Meter (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller

INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

Float Switch Sensor/Water Level Controls Tank Overflow, Controls Sensor Automatic Water Motor Off when Tank Full

Float Switch Sensor controls Automatic pressure pump and Sump/open well Pump off when tank empty at a level to protect pressure pump, Sump/open well Pump as a Dry Running Preventer for safety from motor damage

Rated Voltage:- 220-240V; Frequecy:- 50/60Htz; Rated Current:- 10A; Contacts:- NO+NC; Weight:- 625 Gm; Maximum Working Temperature:-60 c; IP Rating:- IP67;

INSTRUCTIONS FOR INSTALLATION Insert the cable in the counter weight (Black color part), from the conical part and rotate it. Thus causing the given ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

Motor Load - Up To 1.5 hp To 2 hp

Endurance: =500,000 times of wire and Plastic Body Electrical

Rated voltage: 250V and Rated current: 6A/Contacts: NO+NC and Weight: 660 g

Cable: 3 Meter (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller

INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure